1967 Yenko 427 Camaro RS/SS "Mystery Engine"

553 h.p. / 534 lbs./ft. Torque

Cherrick PerformancePackage Specifications:
- Nut and Bolt Restoration
- Professional Body Restoration and Paint by Randy Misekow
- Paint color GM Deep Water Blue
- Very rare original Yenko Stinger Hood
ALL NEW
- 427 c.i. Big Block Aluminum Engine
- Accel DFI Fuel Injection & Hardware
- Tremec Manual 5-speed Transmission w/o.d.
- BeCool Cooling Package
- Martz Engineering Frt. Sub-frame & Suspension
- Wilwood Brakes & Hardware
- Hooker Headers & Flowmaster Exhaust
- Rear Suspension Kit & Brakes
- Vintage Air Conditioning
- Dakota Digital Dash
- Boyd Coddington 17" Polished Aluminum Wheels
- BFG Performance Rated Tires
- Moser 12 Bolt Rear End w/3.73 gear posi
- Road Test, Chassis Tune & custom PT Calibration

1967 Camaro Yenko 427 RS/SS "Mystery Engine" Photo Gallery

1967 Yenko 427 RS/SS "Mystery Engine" short video

History Details regarding the Yenko Camaro:

The Yenko Super Camaro was a modified Chevrolet Camaro prepared by Yenko Chevrolet, under the command of Don Yenko. The originals were all first-generation Camaros. When the Camaro debuted, a General Motors corporate edict prevented it from carrying an engine larger than 400 in³ (6.6 L) V8; this put the Camaro at a serious disadvantage to the Ford Mustang and Plymouth Barracuda, since neither Ford nor Plymouth had a such a limit. Don Yenko, however, knew there was a market for an ultra powerful Camaro and found ways around the GM limit.

1967 Yenko Camaro SS L-72 425 Horse Power 1967


Yenko ordered L-78 equipped SS Camaros and swapped in the Chevrolet Corvette's L-72 427 in³ (7.0 L) V8. The cars came with a 4.10 rear end and heavy-duty suspension. The exact number of cars produced is not known; most estimates are around 50. Yenko also installed a fiberglass replacement hood similar to the "Stinger" hood featured on 1967 big-block Corvettes.

Don Yenko's Camaros were equipped with a 427ci L-72 in them with either an M21 or M22 transmission. The horsepower was rated at 423 hp (315 kW). Yenko Camaros were not allowed to race for Chevrolet on the drag strip because they were not made by Chevrolet. Chevy's answer to this was the Copo Camaro, or Central Office Production Order, in 1968. The Copo Camaros were equipped with the same 427ci engine and were allowed to race for Chevy.

1968


Encouraged by the success of the 1967 model, Yenko continued to produce his Camaros. All cars came equipped with the M-21 close-ratio four speed manual transmission. A large, twin-scooped hood replaced the "Stinger" version, and Yenko badges graced the sides and tail light plate.

1969


For 1969, the dealership worked with Chevrolet to have the L-72 engines installed on the factory assembly line using a Central Office Production Order, or COPO. The orders included power disc brakes, a 4.10 Positraction rear end, a stronger front stabilizer, and a heavy-duty 4-core aluminum radiator. Buyers of the car had the option of either the M-21 four speed or the Turbo Hydramatic 400 automatic transmission. A total of 201 cars were sold in 1969, 171 with four speed transmissions and 30 with automatic transmissions. Yenko rounded out the visual package with front and rear spoilers, a cowl-induction hood, special "Yenko 427" badges, twin stripes down the flanks and hood, and the sYc (Yenko Super Car) badge.

Almost 40 years later, these Camaros have been appraised and sold for well over $2.2 million USD at Barrett-Jackson auctions. As of Sept 2008, there are 2 known automatic transmission 1969 Yenko Camaro's. as stated by ESPN auction show.